Water Miser Battery Caps

Description

DESIGNED AND MANUFACTURED BY FLOW SYSTEMS
WATER MISER Battery Caps Save your expensive batteries by saving your water! These caps will reduce water loss by 50% to 60%, keep your batteries clean and dry and extend the life of your Industrial, Golf Cart, RV, Solar System or other Deep Cycle Batteries.
Guaranteed to Work
– With 10+ years in the field and millions already installed, Flow systems will gladly accept the return of any product that does not work as claimed!
Ideal for Forklift, Golf Cart, Marine, RV and Floor Scrubber Batteries
– The Water Miser Safety Vent can be retro fitted to any U.S. manufactured industrial, semi-industrial, golf cart, marine, RV or solar battery that use a 1/4 turn bayonet type vent cap. This comprises about 98% of all US batteries.
They Stay Drier
– Traditional vent caps that come pre-installed on most lead acid batteries provide a direct line of sight to the electrolyte (
Sulphuric
acid solution) within the battery cell allowing gasses to escape and damage battery storage compartments and other components within reach of these gases. Water Miser vent caps provide 2 barriers to escaping gases that alleviate any concern of acid damage.
Less Watering
– Extended watering intervals are achieved along with routine equalization of the electrolyte being drastically reduced due to the fact that very little electrolyte ever passes through the moisture return medium and hydrophobic cindered disc combination
Batteries Last Longer
– Any residual gases that escape through the moisture retention medium during the charging cycle, carry fewer electrolyte laden droplets,   assuring that electrolyte gravities are stabilized within the battery cell(s).
Reduced Acid Mess
– The handling of acid laden vent caps is a thing of the past – the   built in “anti-splash” device assures that a minimum of electrolyte is propelled into the immediate area when the “flip top” is opened for   inspection or watering.
No Need to Ever Remove Vent Caps
– With already limited access and cramped spaces, there is no need to   ever remove the Water Miser Vent-Caps. Easily inspect or water your   batteries, just flip open the vent cap and when finished, flip closed.
Fits These Batteries
–
WATER MISER Battery Caps will fit all U.S. manufactured industrial battery and most semi-industrial and golf cart batteries including: Exide Technologies, Dyno, Enersys, Hawker,
East Penn (Deka), Crown, Trojan, Surrette / Rolls, Superior, Bulldog, Industrial Battery Engineering (IBE), US Battery, Arrow Battery and Douglas Batteries.
No Explosions
– Externally initiated explosions within the battery’s cell(s) are   virtually eliminated due to the incorporation of the flame and or spark   retardant hydrophobic cindered disc.
Virtually Fume Free Batteries
–   The Water Miser Safety Vent affords the operator a greater safety   factor as he now works in a more friendly, fume freer environment made   possible by the multi-features incorporated in its comprehensive and   practical design.
Easy to Handle
– Lesser potential vulnerability to the problems of Carpal Tunnel Syndrome relative to removal and replacement of twist on vent caps   during servicing and the lesser exposure to electrolyte (Sulphuric acid), as fumes and or liquid, is a factor that certainly warrants   consideration – the water miser safety vent just might in some degree   contribute to the area of liability avoidance.
Pays for Itself
– Flip top design in combination with the moisture return medium /   Hydrophobic Cindered Disc will more than compensate for it’s cost within the first 6 months – less watering, less equalization, less flushing and washing of the battery.